Quick contact

Content

To Navigation

top

JOPA P 124



Download Datasheet JOPA P 124 (pdf)

Ring and disc cutter

The ideal ring cutting device for shop and assembly work.

The device will cut properly, neatly, true to size and with a straight edge, all materi- als suitable for cutting, such as rubber, leather, felt, cardboard, plastics, graphite bonded with smooth metal foil and similar stock. The cutting table consists of 20 mm thick lumber-core plywood mounted on two wooden rests.

How to use the cutter

For first use, the cutter locating unit will be guided from below through the hole arranged at the centre of the cutting table, and then fastened underneath the table board. a hole of 8 mm diameter will be provided in the material to be cut. The knives will be adjusted to the desired diameter by means of the steel rule, and the cutting arm then fastened to the stud bolt projecting through the material.    

Weights and dimensions

DesignationCutting range Dimensions of cutting tablesPacking dimensions
 
Approx. Weight
 
  in mm L x W x H in mm L x W x Hin mm net - gross
P124-300  30 - 300  320 x 320 x 20  360 x 360 x 170  4 - 4,5 kg
P124-600  30 - 600  620 x 620 x 20  660 x 660 x 115  7 - 9,5 kg
P124-1000  30 - 1000  1020 x 1020 x 20  1060 x 545 x 155  14 - 19 kg

[Illustrations and dimensions may be subject to changes as result of technical progress]

Download Datasheet JOPA P 124 (pdf)

Accessories and spare parts


Cutting blade of tool steel (standard knife) [Ref.-No. 451]

for rubber and similar soft materials


Cutting blade of tool steel (standard knife) [Ref.-No. 452]

fe.g. for fibrous materials, graphite bonded with stainless steel, and all materials where long tool life is important.


Cutting wheel with holder [Ref.-No. 453]

for all materials for which the rolling of the cutting wheel brings advantages, such as f. i. for soft rubber types and similar materials, graphite etc. (smallest cutting diameter is limited)


Cutting wheel without holder [Ref.-No. 1354]


Chipping blade [Ref.-No. 455]

for stock removal e.g. on hard plastics, and other materials allowing a stock remo-ving operation


Hold-downplates [Ref.- No. 124-04]

for holding down the material to be cut. The softer and thinner the material, the more accurately the hold-down disk will have to be adapted to the cutting diameter.

(Comprising 4 pieces of Dia. 100-250mm)


Hold-downplates [Ref.- No. 124-10]

for holding down the material to be cut. The softer and thinner the material, the more accurately the hold-down disk will have to be adapted to the cutting diameter.

(Comprising 10 pieces of Dia. 100-250mm)